The Government published what designs are allowed and the dimensions must have the safety vest.
Its market value reaches up to 20 times its manufacturing cost and fines for not having it reach up to $ 23 thousand. Sufficient numbers to get to work and learn how to make the garment fashionable this summer.
The materials are not hard to find and the sewing process is not that complicated, says Alejandra Alvarez, academic coordinator of the School of Design and Costumes of the US Pacific.
The Government published what designs are allowed and the dimensions must have the vest, so there is more to get to work:
Materials:
-1 Meter yellow cloth fluorine (you will use between 50 and 70 cm depending on your body type).
-Hilo The same color or transparent polyester.
–Reflective Tape of at least 50mm thick.
Making:
The designer of the US Pacific recommends that measures other garment is used as a reference, considering that the vest you’ll use on the clothes you have on. It cannot be too tight.
For women, measure the contour of the bust, which is the widest part of the torso, and give a few extra centimeters for added clearance.
When the reflective fabrics and the molds are already cut, and then come the seam. Then review the provision should be reflective hunches.
Bands around the torso should be at a minimum distance of 50mm between them, just as with the lower edge of the reflective fabric.
“With a home machine can be done without problems, because the materials are not very thick, but it would be advisable to work with the largest stitch and tension a little loose to avoid problems,” concludes the designer Alejandra Alvarez from the US Pacific.